Acrylic Primer

PVA emulsion based acrylic primer to strengthen the internal and external weak surfaces. Applied to the surfaces of the construction elements such as coat, concrete, brick, gas concrete, etc

 

KEY BENEFITS

• Protects from rain, frost, snow and sunshine
• Protects from rain, frost, snow and sunshine, will not peel or flake
• Quick drying, low odor and VOC
• Shower proof in one hour

 

AVAILABLE IN SIZES

In 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets

COLOUR & GLOSS RANGE

White or the colors which are proper for the application layer, matt

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 70 ± 2 %

Specific Gravity 1.5 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

Southwind Acrylic Primer is applied in a single layer by thinned with the 10-15% water and made being ready for the last layer paint. The last layer dye must be applied minimum after 6 hours. It is recommended that it shall be applied between +5 °C and 30 °C

SPREADING RATE

150-250 gr/m2 for single layer application depending on the surface situation

 

REDUCTION

10-15% water can be added

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry: At 20 °C, 30 minutes

Recoat: 4 hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets should be in accordance with local authority guidelines.

 

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Online: www.southwindpaints.com

Email: info@southwindpaints.com

Phone: +90 530 429 9233