Ready Colour Plaster

Styrene acrylic copolymer based exterior coating material with line pattern. Applied to all surfaces of the construction elements such all fine plasters, smoothly processed coarse plaster, concrete, etc.

 

KEY BENEFITS

• Extremely durable against the external factors,
•  Allows for breathing of the surface, 
• Creates different patterns in the application direction, 
• Covers the capillary cracks,
• Easy and fast application

 

AVAILABLE IN SIZES

In 25 kg plastic buckets or sacks

 

COLOUR & GLOSS RANGE

Various colour options, matt

 

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment: Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume solid

Specific gravity

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

Acrylic Primer is applied in accordance with the color of ready plaster, after the application surfaces are cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface are removed. Minimum after 6 hours, Southwind Ready Plaster is applied with its special plastic spatula by thinning with 1-5% water and selecting the pattern direction. It is recommended that it shall be applied between +5 °C and 30 °C.

SPREADING RATE

3-3.5 kg/m2 depending on the surface situation.

 

REDUCTION

  1-5% water may be added

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry At the 20°C, 6-8 hours

Recoat 4 hours

This is dependent upon temperature and humidity. 

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of buckets or sacks should be in accordance with local authority guidelines.

                           

PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Online: www.southwindpaints.com

Email: info@southwindpaints.com

Phone: +90 530 429 9233