Multicolor Paint
July 12, 2024
Paint Remover
July 12, 2024
Thermal Paint
It has high performance and low thermal conductivity values. By NASA space shuttle program has been developed within the framework includes ceramic microspheres. The elastomeric resin based interior and exterior is a special coating that provides heat and water insulation. Areas of use: Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, ytong, brick, etc.
PRODUCT DESCRIPTION & USE
It has high performance and low thermal conductivity values. By NASA space shuttle program has been developed within the framework includes ceramic microspheres. The elastomeric resin based interior and exterior is a special coating that provides heat and water insulation. Areas of use: Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, ytong, brick, etc.
KEY BENEFITS
- Depending on the number of applications to the wall of the building heating and cooling energy costs 40% in energy savings rates are up. Special vacuum ceramic microspheres doped Southwind thermal paint interior wall and ceiling paint the inside is used as the radiant heat is still reflects inside, radiant heat that is coming with the sun’s rays when used in exterior also reflect outside.
AVAILABLE IN SIZES
Main In 3.5 kg, 10 kg, 20 kg, 25 kg plastic buckets
COLOUR & FLOSS RANGE
Matt appearance
FLASH POINT
Flash point of this product is 39 degrees Celsius.
VOC CONTENT
Available upon request
COMPOSITION (NOMINAL)
Pigment: Lightfast pigment
Binder: Acrylic binder
Solvent: Water
SOLIDS – SPECIFIC GRAVITY
Volume Solids % 70 ± 2
Specific Gravity 1.6 ± 0.05 gr/ml
SURFACE PREPARATION
The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed.
APPLICATION
To apply paint to the surface dirt, oil, rust etc. all kinds of impurities must be removed from to the surface. Stir well before use. 3 coats should be applied by roller or brush without thinning. Paint must dry completely between coats.
SPREADING RATE
400-500 gr/m2 or 250-350 ml/m2 in the double layer depending on the surface’s situation.
REDUCTION
Do not reduce this product
DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)
1-2 hours depending on the ambient temperature and humidity
CLEANING UP
Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose of can in accordance with local authority guidelines.
PRECAUTIONS / WARNINGS
Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally. If medical advice is needed, have product container or label at hand. Dispose of contents to a waste disposal facility in accordance with local/national regulations. Safety data sheet available on request.
STORAGE
Min. 1 year in its package, protecting from freezing.
FOLLOW US ON
Online: www.southwindpaints.com
Email: info@southwindpaints.com
Phone: +90 530 429 9233
Reviews
There are no reviews yet.