Water Based Satin Paint

PRODUCT DESCRIPTION & USE

Acrylic copolymer binding, can be fully wiped, semi-mat interior satin paint. Applied to the surfaces of the construction elements such as cement coat, gypsum coat, plasterboard, gas concrete, brick, etc

 

KEY BENEFITS

• Well adhesion to all surfaces, 
• Well coating, 
• No cracking or falling, 
• Odorless, 
• Not harmful to the environment and health, 
• May be wiped and washed with water,
• Durable against the strokes and scratches

 

AVAILABLE IN SIZES

   In 3.5 kg, 10 kg, 20 kg plastic buckets

 

COLOUR & GLOSS RANGE

Various colour options

  

FLASH POINT

Not applicable since this product is non-flammable

 

VOC CONTENT

Lower than EU limits

 

COMPOSITION (Nominal)

Pigment:  Lightfast pigment

Binder:    Acrylic binder

Solvent:   Water

 

SOLIDS – SPECIFIC GRAVITY

Volume Solids 55 ± 2 %

Specific Gravity 1.35 ± 0.05 gr/ml

 

SURFACE PREPARATION

The application surfaces should be cleaned from the dirt, oil, dust and all loosen structured swollen layers, the faults on the surface should be removed. 

 

APPLICATION

After Southwind Isolacque Primer is applied, Southwind Water Based Satin Paint is applied in two layers. 2 hours should be allowed between the layers. It is applied easily by fell roll or brush by thinned with the 25-30% water depending on the application surface. It is recommended that it shall be applied between +5 °C and 30 °C

 

SPREADING RATE

100-150 gr/m2 or 67-100 ml/m2 for double layer application 

depending on the surface condition.

 

REDUCTION

  25-30% water may be added depending on the surface condition

 

DRYING TIMES (SINGLE COAT, STANDARD THICKNESS)

Touch Dry   At 20 °C   30 minutes

Recoat 4hours

This is dependent upon temperature and    humidity

 

CLEANING UP

Clean up with soap and water. After cleaning up be sure to flush spray equipment with solvent to prevent rusting following manufacturer’s instructions. Dispose the bucket in accordance with local authority guidelines.

 

 PRECAUTIONS / WARNINGS

Keep out of reach of children. Ensure good ventilation during application and drying. If the product comes in contact with the eyes rinse immediately with plenty of water. To remove splashes from skin, use soap and water or a recognized skin cleaner. Do not take internally.

 

STORAGE

 The product should be kept in a dry place. Lid should be closed   tight when not in use. Not to be exposed to direct sunlight. Stock life is 1 year in original container. Protect from freezing.

 

FOLLOW US ON

Online: www.southwindpaints.com

Email: info@southwindpaints.com

Phone: +90 530 429 9233